The sister type RIEGL VQ-1560i-DW offers two LiDAR channels of different wavelengths, green and infrared (IR). These wavelengths are well chosen to allow the acquisition of scan data of complementary information content, thus delivering two independent reflectance distribution maps, one per laser wavelength.
Riegl Airborne Scanning
Phase One Aerial Systems
The new VQ-1560 II-S follows the successful concept of RIEGL’s proven dual channel laser scanner series. With increased laser power the operational altitudes are extended up to 1600m AGL at a pulse repetition rate of 4MHz, or up to 4000m AGL at a pulse repetition rate of 540kHz (all values given for 20% target reflectance). These improved maximum ranges allow an increase of the system’s productivity by about 25% for a very attractive point density range.
The Dual LiDAR Waveform Processing Airborne Scanning System VQ-1560 II provides further increased performance and highest productivity based on a laser pulse repetition rate of up to 4 MHz, resulting in more than 2.66 million measurements per second on the ground.
The design of the VQ-880-G II topo-bathymetric airborne laser scanning system allows flexible application of the integrated, factory-calibrated high-end GNSS/IMU system and of up to two cameras to meet specific requirements. Complemented by a RIEGL data recorder, the VQ-880-G II LiDAR system can be installed on various platforms in a straightforward way.
The RIEGL VQ-880-GH is a fully integrated airborne laser scanning system for combined hydrographic and topographic surveying
The system is offered with integrated and factory-calibrated high-end GNSS/IMU system and up to two cameras. The design allows flexible application of these components to specific requirements.
The RIEGL VP-1 HeliCopterPod is designed to offer smooth integration of airborne laser scanning systems into manned helicopters. The small and lightweight pod can be mounted on standard hard points and typical camera mounts. Quick release adapter brackets and a minimum of external cabling (i.e. power supply, LAN, GPS antenna) allow quick system installation and removal.
The RIEGL VPX-1 is a lightweight and streamlined pod that carries a complete airborne laser scanning platform for easy and quick mounting on suitable support arms on helicopters.
RIEGL VQ-780 II S
The RIEGL VQ-780 II-S is a high performance, rugged, lightweight, and compact airborne mapping sensor. This versatile system is designed for high efficient data acquisition at low, mid, and high altitudes, covering a variety of different airborne laser scanning applications from high density to wide area mapping.
VQ-780 II S brochure
RIEGL VQX-1 Wing Pod
The RIEGL VQX-1 is a compact, rugged, and aerodynmically shaped wing pod ready for userfriendly installation and straight forward application to facilitate various airborne mapping applications.
RIEGL VQ-780 II
The new RIEGL VQ-840-GL is a fully integrated, compact airborne laser scanner for combined topographic and bathymetric surveying. The LiDAR system is now offered in a new design. Maintaining the proven form factor, the internal redesign and use of very lightweight material enables a reduced weight of less than 10 kg (22 lbs), making the VQ-840-GL even more suitable for UAV integration.
RIEGL VQ-840 G
The Waveform Processing Airborne Laser Scanner RIEGL VQ-780 II provides further increased performance and highest productivity based on a laser pulse repetition rate of up to 2 MHz, resulting in more than 1.33 million measurements/sec on the ground.
The RIEGL VQ-840-G is a fully integrated compact airborne laser scanner for combined bathymetric and topographic surveying. The system is offered with an optionally integrated and factory-calibrated GNSS/IMU system and can be complemented with an optional camera or IR rangefinder. The VQ-840-G is a compact and lightweight LiDAR system to be installed on various platforms including UAVs.
RIEGL VQ-840 GL
PhaseOne 150MP/100MP Aerial System
The 150MP/ 100MP Aerial Systems are fully integrated solutions based on the iXM-RS150F/ iXM-RS100F high-resolution metric cameras. Each aerial solution includes a camera, iX Controller with integrated Applanix GNSS-Inertial, Somag stabilizer, IMU unit, and Phase One flight planning and management software – iX Plan, iX Flight, and iX Capture.
PhaseOne 280MP Aerial System
The Phase One 280MP Aerial System offers the highest image capture rate and dynamic range, increasing the overall quality and accuracy of the final photogrammetric products.
The aerial solution provides a large format option that is compact and lightweight, for use in a wide range of aircraft.
PAS 280 MK2 is comprised of a camera, iX Controller with integrated Applanix GNSS-Inertial, Somag gyro-stabilized mount (DSM 400), IMU unit, and Phase One flight planning and management software – iX Plan, iX Flight, and iX Capture.
PhaseOne PAS 880 Aerial System
PAS 880 provides 20,000 pixels across flight lines for the nadir and 14,000 pixels for each of the oblique cameras.
An unbeatable performance of 2 frames per second enables 80% forward overlap at high speed.
The combination of 90mm/150mm lenses for nadir and oblique ensures balanced ground resolution products for all cameras. The central leaf shutter provides speed up to 1/2500 sec. eliminating motion blur. The 3,76μm BSI pixels ensures sharp images under any light condition.
PAS 880 delivers the highest quality and accuracy in mapping imagery.