RIEGL VQ-1560i

The ultra-high performance, fully integrated and calibrated Dual Channel Airborne Mapping System RIEGL VQ-1560i makes use of RIEGL's sophisticated Waveform-LiDAR technology enabling an excellent multiple-target detection capability and Multiple-Time-Around (MTA) processing. The system is capable of online waveform processing as well as full or smart waveform recording, resulting in unsurpassed information content on each single target.

VQ-1560i brochure

RIEGL VQ-1560i-DW

The sister type RIEGL VQ-1560i-DW offers two LiDAR channels of different wavelengths, green and infrared (IR). These wavelengths are well chosen to allow the acquisition of scan data of complementary information content, thus delivering two independent reflectance distribution maps, one per laser wavelength.

VQ-1560i-DW brochure

RIEGL VQ-1560 II

The Dual LiDAR Waveform Processing Airborne Scanning System  VQ-1560 II provides further increased performance and highest  productivity based on a laser pulse repetition rate of up to 4 MHz, resulting in more than 2.66 million measurements per second on the ground.

VQ-1560 II brochure

RIEGL VQ-880G II

The design of the VQ-880-G II topo-bathymetric airborne laser scanning system allows flexible application of the integrated, factory-calibrated high-end GNSS/IMU system and of up to two cameras to meet specific requirements. Complemented by a RIEGL data recorder, the VQ-880-G II LiDAR system can be installed on various platforms in a straightforward way.

VQ-880G II brochure

RIEGL VQ-880 GH

The RIEGL VQ-880-GH is a fully integrated airborne laser scanning system for combined hydrographic and topographic surveying

.

The system is offered with integrated and factory-calibrated high-end GNSS/IMU system and up to two cameras. The design allows flexible application of these components to specific requirements. 

VQ-880-GH brochure

RIEGL VQ-580 II

In further development of the RIEGL VQ-580 Airborne Laser Scanner Series – the RIEGL VQ-580 II presents itself in a completely new design that successfully takes up the already proven qualities and leads them to a new standard of performance and user-friendliness.

VQ-580 II brochure

RIEGL VQ-480 II

In further development of the RIEGL VQ-480 Airborne Laser Scanner Series – the RIEGL VQ-480 II presents itself in a completely new design that successfully takes up the already proven qualities and leads them to a new standard of performance and user-friendliness.

VQ-480 II brochure

RIEGL VP-1

The RIEGL VP-1 HeliCopterPod is designed to offer smooth integration of airborne laser scanning systems into manned helicopters. The small and lightweight pod can be mounted on standard hard points and typical camera mounts. Quick release adapter brackets and a minimum of external cabling (i.e. power supply, LAN, GPS antenna) allow quick system installation and removal.

VP-1 brochure

RIEGL VQ-780i

The RIEGL VQ-780i is a high performance, rugged, lightweight, and compact airborne mapping sensor. This versatile system is designed for high efficient data acquisition at low, mid, and high altitudes, covering a variety of different airborne laser scanning applications from high density to wide area mapping.

VQ-780i brochure

RIEGL VQ-780 II

The Waveform Processing Airborne Laser Scanner RIEGL VQ-780 II  provides further increased performance and highest productivity based on a laser pulse repetition rate of up to 2 MHz, resulting in more than 1.33 million measurements/sec on the ground.

VQ-780 II brochure

RIEGL VUX-1LR

The Waveform Processing Airborne Laser Scanner RIEGL VQ-780 II  provides further increased performance and highest productivity based on a laser pulse repetition rate of up to 2 MHz, resulting in more than 1.33 million measurements/sec on the ground.

VUX-1LR brochure

RIEGL VQ-840 G

The RIEGL VQ-840-G is a fully integrated compact airborne laser scanner for combined bathymetric and topographic surveying. The system is offered with an optionally integrated and factory-calibrated GNSS/IMU system and can be complemented with an optional camera or IR rangefinder. The VQ-840-G is a compact and lightweight LiDAR system to be installed on various platforms including UAVs.

VQ-840G brochure

LINKS
ABOUT

Mena3D GmbH

We are a European-based company and our headquarters is located in Germany.
We have several offices in the Middle East and North Africa.


Please feel free to contact us or send your request for a live demo or quotation!

SOCIAL
  • Facebook
  • LinkedIn
  • Twitter
  • YouTube

Vogelsangstrasse 27,

70176 Stuttgart Germany 

Phone +49 (0) 711 94568282

info@mena3d.com